Robotface

  • HOME
  • MOTION CONTROL
  • PHANTOM 4K
  • STUDIOS
  • CONTACT

STUNNING SLOW MOTION FOOTAGE

Phantom VEO 4K slow motion cinema camera

Our compact Phantom VEO 4K super slow motion camera and data ingest kit is avaialble with an experienced DP & operator across Melbourne, Sydney and anywhere in Australia. We love utilising the camera on our BOLT Motion Control Robot, but just as much we love getting out on location with the camera to shoot amazing content for our clients. Due to the Phantom's unique methods of image capturing and data offloading we'll send an experienced DP or operator to assist your production. Already have an experienced Phantom camera operator on your crew? No worries, let's chat and get the camera involved in your production.

SAME SENSOR AS PHANTOM FLEX 4K

Phantom VEO 4K slow motion cinema camera

Blistering 15-1,000 fps at 4K resolution with 72GB of on-board RAM... This allows 5.6 seconds of 12-bit recording time at 1,000 fps of 4K capture - thus creating almost 3.5 minutes playback at 25 fps. The camera can support PL, Canon EF and manual Nikon F-Mount lens types.

The Phantom VEO 4K shares the same sensor and high speed frame rates as the Phantom FLEX 4K - but is more compact. So comparably, think Alexa Mini vs Alexa SXT. It is scaled back into lighter, more compact body - just 2.5kg - a form factor smaller than the RED Epic.

12bit RAW

UP TO 4K RES

super-35mm field of view & depth of field

1,000 fps 4K

5.7 SEC BURST

up to 3 min 40sec @ 25fps playback for single clip

2.5kg

SUPER LIGHTWEIGHT

Ready for gimbal, crane, drone & and our BOLT robot!

72GB

INTERNAL STORAGE

Offload in seconds via 10gbps ethernet or CFast V2 cards

KEY FEATURES

- Available for rent with skilled operator Australia-wide
- 4K (4096 x 2160) at up to 1000 fps
- 2K (2048 x 1080) at up to 1977 fps
- Achieve up to 50,000 fps as you decrease resolution
- Super 35mm sensor
- Records 12bit RAW
- Global Shutter, switchable to Rolling Shutter
- Recommended EI range is 800-1000
- PL or electroinc EF mount or F-mount for manual Nikon lens only
- 72GB RAM standard (5.6 seconds at 4K)
- CFast 2.0 media compatibility for on board data transfer
- 10Gb Ethernet for optimal workflow to computer system
- On-camera controls, HDMI, 3G-SDI, secondary battery input
- Based in Melbourne though can be shipped Australia wide via The Vision House

HOW MUCH LIGHT DO I NEED?

Phantom exposure tips

Everytime you double your frame rate it is equivalent to closing down your lens one stop and thus you require twice as much light to expose your shot. As a very loose guide though, when shooting a subject backlit in full Australian sunlight at 1,000fps, you'll expose at approx T2.8-4.0 rating the Phantom at 1250ISO with a 180 degree shutter. Shooting a quick burst of flame in pitch darkness had us exposing around T5.6-8.0

PRODUCTION WORKFLOW

Seance Glue Tools Software

Phantom cameras are unconventional in that you will typically trigger the recording immediately on or after the action. Then, via the in-camera controls or via our Séance software, you mark the in and out points in the cached clip to determine how much of the data (recorded clip) you wish to keep. The camera's RAM (72GB) can be customised to fill up on one shot, or be segmented to allow many shots before data offload is required.

DATA OFFLOAD

Phantom VEO 4K with 10 gbps ethernet

The camera's lightning-fast 10 gbps ethernet connection to a MacBook (approx 1.25 GB/sec) allows Séance software to offload 72GB of internally cached media in just over one minute to our 2x lightning fast SSD drives. Or automate offload internally to industry standard exchangable CFAST V2 cards in-camera.

Footer Banner Section

GET IN TOUCH
©2019 - Robotface Pty Ltd